top of page
Huawei Switch S110-16LP2SR (16*GE ports(124W PoE+), 2*GE SFP ports, AC power)

Huawei Switch S110-16LP2SR (16*GE ports(124W PoE+), 2*GE SFP ports, AC power)

7,700.00EGP سعر عادي
7,250.00EGPسعر البيع
S110-16LP2SR
Huawei Switch S110-16LP2SR (16*GE ports(124W PoE+), 2*GE SFP ports, AC power)
الكمية

  • Description

    S110-16LP2SR

  • Overview

    Item Details
    Description S110-16LP2SR (16*10/100/1000BASE-T ports, 2*GE SFP ports, PoE+, AC power)
    Part Number 98012197
    Model S110-16LP2SR

  • Components

    1 PWR indicator 2 Sixteen GE PoE+ electrical ports
    3 Electrical port indicator 4 Two GE optical ports
    5 Optical port indicator 6 Port mode switch button

     

    NOTE:

    Standard Mode: All ports are in the same VLAN, and the flow control function is enabled.

    Port Isolation: All downlink ports are isolated from each other and cannot communicate with each other. Downlink ports can communicate only with uplink ports. (The last two downlink electrical ports are not isolated.) Uplink ports are not isolated or aggregated.

    Uplink Aggregation: Two uplink optical ports are aggregated into a trunk interface. Eth-Trunk supports load balancing only based on source physical ports.

    Flow Control Disabling: All ports are in the same VLAN and flow control is disabled.
    7 Port indicator status switch button

     

    NOTE:

    Port status: The port indicator indicates the data transmission status of the port.

    PoE status: The port indicator indicates the PoE status of the port.

    		 8 Ground screw
    9 AC socket

     

    NOTE:

    Use the power cable delivered with the device.

    		 – –

  • Ports

    Port Connector Type Description Available Components
    GE PoE+ electrical port RJ45 A GE PoE+ electrical port sends and receives service data at 10/100/1000 Mbit/s.

     

    The port supports the PoE function.

    		 Ethernet cable
    GE optical port SFP A GE optical port can send and receive data at 100/1000 Mbit/s.
    • FE SFP/eSFP optical modules (only optical modules with transmission distances less than or equal to 15 km are supported)
    • GE eSFP optical modules (only optical modules with transmission distances less than or equal to 10 km are supported)

  • Indicators and Buttons

    Indicator Color Status Description
    PWR indicator – Off The device is powered off.
    Green Steady on The power supply is normal.
    Port indicator (Port status)

     

     

    		 – Off The port is not connected or has been shut down.
    Green Steady on A link has been established on the port.

     

    NOTE:

    During device startup, all port indicators are steady green for about 2 seconds and then off, indicating that service initialization is complete.
    Green Blinking The port is sending or receiving data.
    Port indicator (PoE status) – Off The port is not supplying PoE power.
    Green Steady on The port is supplying power to the connected PD.
    Green Blinking The PoE power of the device is insufficient, and the port cannot provide power to the PD.

  • Power Supply System

    The device uses the power adapter delivered with the device to supply power to the device and the connected PD. The power adapter can provide 124 W PoE power, which ensures full PoE power on 8 ports in compliance with 802.3af or on 4 ports in compliance with 802.3at.

  • Heat Dissipation System

    The device has no fans and uses natural heat dissipation.

bottom of page