top of page
Huawei Switch S220-48P4X 48*GE ports(380W PoE+), 4*10GE SFP+ ports, built-in AC

Huawei Switch S220-48P4X 48*GE ports(380W PoE+), 4*10GE SFP+ ports, built-in AC

30,450.00EGP سعر عادي
30,200.00EGPسعر البيع
S220-48P4X
(48*10/100/1000BASE-T ports(380W PoE+), 4*10GE SFP+ ports, built-in AC power)
الكمية

  • Description

    S220-48P4X

  • Overview

    Item Details
    Description S220-48P4X (48*10/100/1000BASE-T ports(380W PoE+), 4*10GE SFP+ ports, built-in AC power)
    Part Number 98012378
    Model S220-48P4X
    First supported version V600R023C00

  • Components

    1 Forty-eight 10/100/1000BASE-T PoE+ ports 2 Four 10GE SFP+ ports
    3 One console port 4 One MODE button
    5 One RST button

     

    To reset the device, press the button.

    Resetting the device will cause service interruption.

    		 6 Ground screw

     

    NOTE:

    It is used with a ground cable.
    7 Jack for AC power cable locking strap

     

    NOTE:

    The AC power cable locking strap is not delivered with the switch.

    		 8 AC socket

     

    NOTE:

    It is used with an AC power cable.

  • Ports

    Port Connector Type Description Available Components
    10/100/1000BASE-T port RJ45 A 10/100/1000BASE-T Ethernet electrical port sends and receives service data at 10/100/1000 Mbit/s. Ethernet cable
    10GE SFP+ port SFP+ A 10GE SFP+ Ethernet optical port supports auto-sensing to 1000 Mbit/s. It sends and receives service data at 1000 Mbit/s or 10 Gbit/s.
    • GE eSFP optical modules
    • GE-CWDM eSFP optical modules
    • GE-DWDM eSFP optical modules
    • GE SFP copper module
    • 10GE SFP+ optical modules
    • 10GE-CWDM SFP+ optical modules
    • 10GE-DWDM SFP+ optical modules
    • 1 m and 3 m SFP+ high-speed copper cables
    • 10 m SFP+ AOC cables
    Console port RJ45 The console port is connected to a console for on-site configuration. Console cable

  • Indicators and Buttons

    No. Indicator Name Color Status Description
    1 PWR Power module indicator – Off The switch is powered off.
    Green Steady on The power supply is normal.
    2 SYS System status indicator – Off The system is not running.
    Green Fast blinking The system is starting.
    Green Steady on During the system startup preparation phase, the SYS indicator is steady green, which lasts for a maximum of 30 seconds.
    Green Slow blinking The system is running normally.
    Red Steady on The system does not work normally after registration, or a fan alarm or a temperature alarm has been generated.
    3 PoE PoE indicator – Off The PoE mode is not selected.
    Green Steady on The PoE mode is selected, and service port indicators show the PoE status of each port.
    4 MODE Mode switch button – – If you do not press the MODE button within 45 seconds, the service port indicators restore to the default mode.
    5 – Electrical service port indicator (one indicator for each port) Arrowheads show the positions of ports. A down arrowhead indicates a port at the bottom, and an up arrowhead indicates a port at the top. Meanings of service port indicators vary in different modes. For details, see Table 4-45 and Table 4-46.

     

     

     
    6 – Optical service port indicator (two indicators for each port) Each optical port has two single-color indicators. The one on the left is the ACT indicator (yellow), and the one on the right is the LINK indicator (green).

     

    Arrowheads show the positions of ports. A down arrowhead indicates a port at the bottom, and an up arrowhead indicates a port at the top.
    7 CLOUD Cloud indicator – Off The device is not in the cloud management state.
    Blue Fast blinking The device is connecting to the cloud.
    Blue Slow blinking The device is in the cloud management state.

    Table 4-45 Description of service port indicators in different modes (one indicator for each port)

    Display Mode Color Status Description
    Default mode – Off The port is not connected or has been shut down.
    Green Steady on A link has been established on the port.
    Green Blinking The port is sending or receiving data.
    PoE mode – Off The port is not providing power to a powered device (PD).
    Green Steady on The port is providing power to a PD.
    Green Blinking The power of the PD connected to the port exceeds the power capacity of the port or the power threshold configured on the port. Alternatively, the PD does not comply with IEEE standards.

    Table 4-46 Description of service port indicators in different modes (two indicators for each port)

    Display Mode Color Status Description
    Default mode (LINK indicator) – Off The port is not connected or has been shut down.
    Green Steady on A link has been established on the port.
    Default mode (ACT indicator) – Off The port is not connected or has been shut down, or no data is transmitted or received.
    Yellow Blinking The port is sending or receiving data.

  • Power Supply System

    The switch has a built-in AC power module and does not support pluggable power modules. The built-in power module can provide 380 W PoE power, which ensures full PoE power on 24 ports in compliance with 802.3af or on 12 ports in compliance with 802.3at.

  • Heat Dissipation System

    The switch has two built-in fans for forced air cooling. Air flows in from the left side, and exhausts from the right side.

  • Technical Specifications

    Item Specification
    Dimensions without packaging (H x W x D) [mm(in.)] Basic dimensions (excluding the parts protruding from the body): 43.6 mm x 442.0 mm x 220.0 mm (1.72 in. x 17.4 in. x 8.66 in.)

     

    Maximum dimensions (the depth is the distance from ports on the front panel to the parts protruding from the rear panel): 43.6 mm x 442.0 mm x 227.0 mm (1.72 in. x 17.4 in. x 8.94 in.)
    Dimensions with packaging (H x W x D) [mm(in.)] 90.0 mm x 550.0 mm x 360.0 mm (3.54 in. x 21.65 in. x 14.17 in.)
    Chassis height [U] 1 U
    Chassis material Metal
    Weight without packaging [kg(lb)] 3.24 kg (7.14 lb)
    Weight with packaging [kg(lb)] 4.29 kg (9.46 lb)
    Typical power consumption [W] 49.44 W
    Typical heat dissipation [BTU/hour] 168.69 BTU/hour
    Maximum power consumption [W]
    • Without PoE: 64.7 W
    • Full PoE load: 462.80 W (PoE: 380 W)
    Maximum heat dissipation [BTU/hour]
    • Without PoE: 220.76
    • Full PoE load: 1579.12
    Static power consumption [W] 34.04 W
    MTBF [years] 48.14 years
    MTTR [hours] 2 hours
    Availability > 0.99999
    Noise at normal temperature (acoustic power) [dB(A)] 49.3 dB(A)
    Noise at normal temperature (acoustic pressure) [dB(A)] 37.3 dB(A)
    Number of card slots 0
    Number of power slots 0
    Number of fans modules 2
    Uplink ports 4 x 10GE SFP+ ports
    Downlink ports 48 x 10/100/1000BASE-T ports (380 W, PoE+)
    Redundant power supply Not supported
    Long-term operating temperature [°C(°F)] -5°C to +50°C (23°F to 122°F) at an altitude of 0-1800 m (0-5905.44 ft.)
       
    Storage temperature [°C(°F)] –40°C to +70°C (–40°F to +158°F)
    Long-term operating relative humidity [RH] 5% RH to 95% RH (non-condensing)
    Long-term operating altitude [m(ft.)] 0–5000 m (0–16404 ft.)
    Storage altitude [m(ft.)] 0-5000 m (0-16404 ft.)
    Power supply mode AC built-in
    Rated input voltage [V]
    • AC input: 100 V AC to 240 V AC, 50/60 Hz
    • High-voltage DC input: 240 V DC
    Input voltage range [V]
    • AC input: 90 V AC to 290 V AC; 45 Hz to 65 Hz
    • High-voltage DC input: 190 V DC to 290 V DC
    Maximum input current [A] 6 A
    Memory 2 GB
    Flash memory Physical space: 1 GB
    Console port RJ45
    Eth Management port Not supported
    USB Not supported
    RTC Not supported
    RPS input Not supported
    Service port surge protection [kV] Common mode: ±7 kV
    Power supply surge protection [kV] Differential mode: ±6 kV; common mode: ±6 kV
    Ingress protection level (dustproof/waterproof) IP20
    Types of fans Built-in
bottom of page