top of page
S110-8T2ST Huawei eKitEngine Unmanaged Switch

S110-8T2ST Huawei eKitEngine Unmanaged Switch

2,860.00EGPالسعر
S110-8T2ST
  • Three working modes
  • standard mode
    port isolation
    flow control disabling
    plug and play
  • configuration-free
    management-free
الكمية

  • Description

    S110-8T2ST

  • S110-8T2ST Overview

     Basic information about the S110-8T2ST

    Item Details
    Description S110-8T2ST (8*10/100/1000BASE-T ports, 1*GE SFP port, 1*10/100/1000BASE-T port, with 1*AC power adapter, fanless)
    Part Number 98012199
    Model S110-8T2ST

  • Components

    1 PWR indicator 2 Port indicator
    3 Eight GE electrical ports 4 One GE electrical port and one GE optical port
    5 Port mode switch button

     

    NOTE:

    Standard Mode: All ports are in the same VLAN, and the flow control function is enabled.

    Port Isolation: All downlink ports are isolated from each other and cannot communicate with each other. Downlink ports can communicate only with uplink ports. Uplink ports are not isolated or aggregated.

    Flow Control Disabling: All ports are in the same VLAN and flow control is disabled.

    		 6 Power adapter socket

     

    NOTE:

    Use the power adapter (12 V 1 A) delivered with the device.

  • S110-8T2ST Ports

    Port Connector Type Description Available Components
    GE electrical port RJ45 A GE electrical port sends and receives service data at 10/100/1000 Mbit/s. Ethernet cable
    GE optical port SFP A GE optical port can send and receive data at 100/1000 Mbit/s.
    • FE SFP/eSFP optical modules (only optical modules with transmission distances less than or equal to 15 km are supported)
    • GE eSFP optical modules (only optical modules with transmission distances less than or equal to 10 km are supported)

  • Indicators and Buttons

     Description of indicators on the device

    Indicator Color Status Description
    PWR indicator – Off The device is powered off.
    Green Steady on The power supply is normal.
    Port indicator – Off The port is not connected or has been shut down.
    Green Steady on A link has been established on the port.

     

    NOTE:

    During device startup, all port indicators are steady green for about 2 seconds and then off, indicating that service initialization is complete.
    Green Blinking The port is sending or receiving data.

  • Power Supply System

    The device is powered by the power adapter delivered with the device.

  • Heat Dissipation System

    The device has no fans and uses natural heat dissipation.

  • S110-8T2ST Technical Specifications

     Technical specifications of the S110-8T2ST

    Item Specification
    Dimensions without packaging (H x W x D) [mm(in.)] Basic dimensions (excluding the parts protruding from the body): 35 mm x 210.0 mm x 130.0 mm (1.38 in. x 8.27 in. x 5.12 in.)

     

    Maximum dimensions (the depth is the distance from ports on the front panel to the parts protruding from the rear panel): 36.5 mm x 210.0 mm x 131.7 mm (1.44 in. x 8.27 in. x 5.19 in.)
    Dimensions with packaging (H x W x D) [mm(in.)] 90.0 mm x 285.0 mm x 180.0 mm (3.54 in. x 11.22 in. x 7.09 in.)
    Chassis height [U] 0.8 U
    Chassis material PC+ABS
    Weight without packaging [kg(lb)] 0.46 kg (1.01 lb)
    Weight with packaging [kg(lb)] 0.70 kg (1.54 lb)
    Typical power consumption [W] 8 W
    Typical heat dissipation [BTU/hour] 27.30 BTU/hour
    Maximum power consumption [W] 8.4 W
    Maximum heat dissipation [BTU/hour] 28.66 BTU/hour
    Static power consumption 2
    MTBF [years] 86.16 years
    MTTR [hours] 2 hours
    Availability > 0.99999
    Noise at normal temperature (acoustic power) [dB(A)] Noise-free (no fans), < 30
    Noise at normal temperature (acoustic pressure) [dB(A)] Noise-free (no fans), < 20
    Number of card slots 0
    Number of power slots 0
    Number of fans modules 0
    Switching capacity To obtain data of this specification item, see the corresponding datasheet or contact the product sales personnel.
    Packet forwarding rate To obtain data of this specification item, see the corresponding datasheet or contact the product sales personnel.
    Working mode
    • Standard mode
    • Port isolation
    • Flow control disabling
    MAC address entry 2K
    Redundant power supply Not supported
    Long-term operating temperature [°C(°F)] 0°C to 40°C (32°F to 104°F) at an altitude of 0-1800 m (0-5906 ft.)
    Restriction on the operating temperature variation rate [°C(°F)] When the altitude is 1800-5000 m (5906-16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.).
    Storage temperature [°C(°F)] –40°C to +70°C (–40°F to +158°F)
    Long-term operating relative humidity [RH] 5% RH to 95% RH (non-condensing)
    Long-term operating altitude [m(ft.)] 0–5000 m (0–16404 ft.)
    Storage altitude [m(ft.)] 0-5000 m (0-16404 ft.)
    Power supply mode Power adapter
    Rated input voltage [V] Power adapter input: 100–240 V AC; 50/60 Hz

     

    Power adapter output: 12 V DC
    Input voltage range [V] Power adapter input: 90 V AC to 264 V AC; 47 Hz to 63 Hz
    Maximum input current [A] 1 A
    Memory –
    Flash memory –
    Console port Not supported
    Eth Management port Not supported
    USB Not supported
    RTC Not supported
    RPS input Not supported
    Service port surge protection [kV] Common mode: ±4 kV
    Power supply surge protection [kV] ±2 kV in differential mode, ±4 kV in common mode
    Ingress protection level (dustproof/waterproof) IP20
    Types of fans None
    Heat dissipation mode Natural heat dissipation
    Airflow direction –
    PoE Not supported

    Certification

    		 EMC certification

     

    Safety certification

    Manufacturing certification
bottom of page