top of page
Huawei eKitEngine S530-48S4XE SWITCH

Huawei eKitEngine S530-48S4XE SWITCH

EGP55,000.00Price
S530-48S4XE
“48 x GE SFP ports,
4 x 10GE SFP+ ports,
2 x 10GE stack ports
Packet forwarding rate: 168 Mpps
Switching capacity: 224 Gbit/s”
Quantity

  • Overview

    Item Details
    Description S530-48S4XE(48*GE SFP ports, 4*10GE SFP+ ports, 2*10GE stack ports, with 1*AC power module)
    Part Number 98012558
    Model S530-48S4XE
    First supported version V600R023C10SPC600
    Remarks
    • When 25 or more GE optical modules with a transmission distance of 40 km or longer are installed on 1000BASE-X optical ports, power modules with at least 180 W power are required.
    • Copper modules can be installed on a maximum of 24 1000BASE-X optical ports.

  • S530-48S4XE Components

    1 Forty-eight 100/1000BASE-X ports 2 Four 10GE SFP+ ports
    3 Two stack ports

     

    NOTE:

     

    These stack ports are available only in CLI-based O&M scenarios.

    		 4 One console port
    5 One USB port 6 One ETH management port
    7 One RST button

     

    NOTICE:

     

    To restore the factory settings and reset the device, hold down the button for at least 6 seconds.

    To reset the device, press the button.

    Resetting the device will cause service interruption. Exercise caution when you press the button.

    		 8 Ground screw

     

    NOTE:

     

    It is used with a ground cable.
    9 Power module slot 1

     

    NOTE:

     

    Applicable power modules:

    • PAC80S12-CN
    • PAC180S12-CN
    • PDC240S12-CN (available since V600R024C00 version)
    • PAC600S12-PB
    • PDC1K2S12-CE

    When 1000BASE-X Ethernet optical ports use 25 or more GE optical modules with a distance of 40 km or longer, a power module with a minimum power of 180 W is required.

    		 10 Power module slot 2

     

    NOTE:

     

    Applicable power modules:

    • PAC80S12-CN
    • PAC180S12-CN
    • PDC240S12-CN (available since V600R024C00 version)
    • PAC600S12-PB
    • PDC1K2S12-CE

    When 1000BASE-X Ethernet optical ports use 25 or more GE optical modules with a distance of 40 km or longer, a power module with a minimum power of 180 W is required.
bottom of page